Multi-Zone / Single Source Systems Using a Receiver. The simplest way to create a two-zone stereo system is likely right at your fingertips. Many home theater receivers feature a Speaker A/B switch that allows a connection to a second set of speakers. Place the additional speakers in another room and install speaker wires leading to the
In most cases, these 16-bit volume controls can bypassed by setting the volume to maximum. When this is done, an external D/A converter can be used to control the playback level. The D/A converter must have a spectacular dynamic range. It is not uncommon to require 20-30 dB of attenuation for normal listening levels.
The level controls of the power amps should be set so you maintain consistent gain staging throughout your system, while allowing ample headroom. If you need to turn them up all the way to achieve that (as is often the case) then you certainly should. • Console/Mic Preamp Gain Settings • Outboard Gear I/O Level Controls • Power Amplifier Sensitivity Controls • Active Crossover Output Attenuators • Using the RaneGain™ Test Set RaneNote SETTING SOUND SYSTEM LEVEL CONTROLS Importance Correctly setting a sound system’s gain structure is one of the most important contributors to jCse4.setting sound system level controls
